It is well known that RTK is a technique that enhances GPS accuracy by using a fixed base station and a rover unit to provide real-time
corrections,achieving centimeter-level precision.Today,RTK technology is one of the essential IoT technologies for intelligent transportation.
IoT device providers should be capable of both RTK and GPS positioning technologies.With the support of RTK,the shortcomings of GPS
positioning can be avoided,allowing vehicle companies—whether engaged in smart vehicle retail,rental,or sharing projects—to not worry
about not achieving centimeter-level positioning.
About RTK:
The closer you are to the base station,the more precise the positioning;the base station should be placed in an area with
minimal interference as an auxiliary positioning technology;based on the base station,there is no reliance on the operator's network.
The IoT device module must include RTK algorithms.
About Base Stations:
The error between two base stations within a distance of 30 kilometers is relatively large.Therefore,we can generate
virtual base stations to maintain high-precision positioning across the entire area.
Relevant Scenarios:
Shared Stalls in Shopping Malls:Using a beacon solution,each stall can be equipped with a beacon for navigation;it can identify whether
someone is on the upper or lower floor through pressure sensors,measuring height variations.
Factory Zone Management:Employee location management.
Temporary Worker Management.
Application of RTK in Golf Courses
Logistics Vehicles Using Geo Fencing:Bypassing high tolls,which may increase travel by 2 kilometers(slightly affecting fuel consumption
and logistics vehicle operation time).
Indoor Sports Venues:On regular bicycles,showcasing daily exercise amounts,similar to a speedometer(gearbox),without communication,
only using Bluetooth;here,I would like to share that Bluetooth mesh consumes more power than standard Bluetooth while using the same
chip technology.
If you need to use someone else's base station,you only need to access their server,which has an interface for receiving;in smart vehicles,
we install smart hardware,referred to as IoT devices or IoT GPS trackers.Whether it’s an IoT device or an IoT GPS tracker,both must have RTK functionality.Companies producing IoT devices should follow a universal protocol for RTK,which can be integrated into vehicles.